Add to Cart:

DART SBF Iron Eagle Race Block, 302/8.2 Deck, 4.00 Bore

$2,597.85

  • Model: test
  • Shipping Weight: 160lbs
  • 100 Units in Stock
  • Manufactured by: Scat


DART SBF Iron Eagle Race Block!

302/8.200 Deck, 4.00 Bore

4 bolt billet caps on all 5 main journals

Coated cam bearings included

STRONGEST Race block on the market! Will Support 2000+hp!

Material: Superior iron alloy

Bore: 4.00” or 4.125” unfinished

Bore & stroke: 4.185” x 3.500” max recommended

Cam bearing bore ID: SVO 2.1995”- 2.2015”

Cam bearings: Special coated, grooved, w/3 oil holes

Cam Bearing O.S. + .010”, +.020”, +.030”

Cam bearing press: .002” - .003”

Cam journal OD: Standard Ford SB (can be bored for 50mm)

Cam Plug: 2.375” dia. cup plug

Cylinder Wall Thickness: .250” min @ 4.185” bore

Cubic inch: 385” max recommended

Deck Height: 8.200” & 8.700”

Deck Thickness: .675” min.

Freeze Plugs: Std Ford press in cup plugs 1.500” OD

Lifter Bores: Std Ford .8752” - .8767” Honed to size

Main journal size: 2.249” Std 302

Main bearing bore: 2.437” - 2.439” Honed to size

Main thrust width: .926” - .928”

Main Cap Bolts: #1 7/16” (2) 3/8” (2)

#2, #3, #4 7/16” (2) 7/16” splayed (2)

#5 7/16” (2) 3/8” (2)

Main cap press: .003” - .004”

Main caps: Steel - 4 bolt, all 5

Main cap register: Deep stepped register on each side (no need for dowels)

Oil system: Std Wet Sump or SVO dry sump

Priority Main oiling with external pump (wet or dry)

Oil Filter: Standard filter

Oil Pan: Aftermarket 302 with dip stick in pan

Rear Main Seal: Std 1 piece seal - FelPro# 2922 or 2941 4.250”x3.625”

Serial No. Right front & main caps

Starter: Standard

Stud & bolt holes, Head: 1/2" std SVO with Blind holes

Timing chain/gears: Standard components

Timing Cover: Uses stock 302 cover

Torque Specs: 1-5 7/16” bolts - 65 ft lbs

1 & 5 3/8” bolts - 35 ft lbs

Weight, approx: 160 lbs - 8.200”


This product was added to our catalog on Wednesday 29 December, 2004.

Copyright © 2024 AD Performance. Maintained by nLinkSolution.com